Interior Digital Displays
Gold-Wire LED · Common-Cathode · Sealed PSU · Smart Cooling Fan · 1+1 Redundancy · Cloud Monitoring · IP65

March II

March II Large Format Outdoor LED Display

Pixel Pitch 4 mm
LED Package Type SMD + Lens
Pixel Density (dots/mu00b2) 62,500
Module Matrix 80×80
Product Details

What Makes the March II Different

01

Gold-Wire LEDs with Lens Enhancement

March II runs on large-chip, gold-wire LEDs paired with precision lens optics. Gold wire is more conductive and more resistant to corrosion than standard bonding wire, which translates directly into a longer lifespan and more consistent brightness over time. The lens design on top maximizes light output while keeping power draw low, 10,000+ nits of brightness at just 100 - 200 W/mu00b2 average consumption.

02

26,000:1 Contrast. Sunlight Doesn't Win.

A precision-engineered mask with extended louvers and a matte black anti-glare finish work together to keep the display readable no matter what the sky is doing. The louvers physically cut off direct sunlight before it reaches the LEDs. What's left is a 26,000:1 contrast ratio and a 3,840 Hz+ refresh rate that keeps content sharp and fluid from any angle, at any time of day.

26,000:1 Contrast. Sunlight Doesn't Win.
03

Common-Cathode Driving, 56% Less on Your Power Bill

Red, green, and blue LEDs each run on their own independent voltage supply, sized to what they actually need. No shared voltage, no wasted energy. Stack that with power supplies running at over 90% conversion efficiency and active PFC (Power Factor u2265 0.98), and the savings add up fast. On a standard 14' u00d7 48' double-sided billboard running 24/7, March II costs $50 a day versus $115 on a regular SMD display, that's $236,045 saved over ten years.

Common-Cathode Driving, 56% Less on Your Power Bill
04

The Only Outdoor Cabinet with a Smart Cooling Fan

March II is the only extruded aluminum outdoor cabinet in its class with a built-in cooling fan. It's software-controlled, the fan activates or cuts off based on ambient temperature, so it only runs when it actually needs to. The power supply sits bonded to the aluminum rear panel with high-conductivity thermal paste, pulling heat away from components before the fan even kicks in. A sealed enclosure keeps condensation, dust, and contaminants out of the equation entirely.

The Only Outdoor Cabinet with a Smart Cooling Fan
05

Two PSUs. Neither One Stops the Show.

Dual power supplies run in parallel during normal operation. If one goes down, the other picks up the full load instantly, no flicker, no black screen, no interruption. Connector redundancy adds another layer: all module power and signal pins are redundantly configured, so a loose pin contact won't affect display performance. March II keeps running while the issue gets sorted.

Two PSUs. Neither One Stops the Show.
06

Service It Without the Hassle

Every component on a March II display, modules, power units, and signal connectors, is reachable from both the front and the rear. The cabinet structure is lightweight aluminum extrusion with quick-connect, weatherproof power and signal connectors throughout. A simple cable cover design shields all connections from UV and weather exposure while keeping the finish clean. Getting in to service the display takes seconds, not a service window.

Service It Without the Hassle
07

90u00b0 to 180u00b0 Corner Splicing. Curves Too.

With 45-degree beveled module edges, March II handles corner splicing from 90u00b0 to 180u00b0 and supports curved surface configurations for large-format outdoor builds. It's also fully compatible with Genesis II's bar-shaped modules, opening up even more creative possibilities for wraparound corners and non-standard display shapes.

90u00b0 to 180u00b0 Corner Splicing. Curves Too.
Why United Signs

Every Display Includes Lifetime Benefits

5 Year Factory Parts Warranty

Covered for five years on parts. Repairs don't become a sourcing issue, what's needed is there and ready to go.

Lifetime Support

A call or message gets you to our support team whenever a technical problem comes up. That doesn't change based on how long you've had the display.

Lifetime Cloud Access

Check on your display remotely any time. No subscription required, no restrictions on when or where you log in from.

Lifetime Software

Viplex is built into the package and stays active for the full life of the display. There's nothing to renew and nothing extra to buy.

Easy Assembly

A plug-and-play modular setup means your team can manage and make changes without bringing in a specialist.

High Definition

Refresh rates near the top of the industry mean the image quality is there. Sharp, clean, and consistent across content types.

Extreme Brightness

10,000+ nits keeps the display legible even in full sun. Outdoor conditions during the day aren't a concern.

Training

We go through daily use and maintenance with your team so they're set up to run the display confidently from the start.

Content Creation

Templated content built for your display by our design team. The creative work is taken care of, so you don't have to do it alone.

Multiple Communication Options

Hardwired, Wi-Fi modem, or cellular modem: pick what works for where you are. All covered under the contract, for life.

60 FPS

Every video plays at 60 frames per second. The motion is fluid, and the playback is consistent.

Trillions of Colors

24-bit color depth means the display shows your content as it was meant to be seen: accurate tones, true to the source.

24-Hour US Technical Support

US-based, available all hours. No overseas delays, no time zone problems. Training videos are also up online around the clock.

Unlimited Software Seats/Licenses

Creative Library, Custom Content, and Corporate Creative Portals are included for your entire team, with no per-seat fees and no usage limits.

How It Works

Our Process

We have a simple, streamlined process once you have decided to purchase one of our Digital Displays.

01

Consultation & Survey

We review your site, define your sign program, and map every location, size, and mounting spec before design begins.

02

Design & Permitting

Certified shop drawings are produced and submitted for permit approval u2014 signed off by your team before production starts.

03

In-House Fabrication

Every sign is built in our own facility with in-house QC. No outsourcing means tighter quality and reliable lead times.

04

Installation & Sign-Off

Certified crews install every sign. We conduct a full walkthrough and provide documentation before handover.

Technical Data

March II Specifications

All specifications subject to change.

Parameters 4mm 6.67mm 10mm 10mm (Oval)
Pixel Pitch 4 mm 6.67 mm 10 mm 10 mm
LED Package Type SMD + Lens SMD + Lens SMD + Lens Oval Molding
Pixel Density (dots/mu00b2) 62,500 22,500 10,000 10,000
Module Matrix 80×80 48×48 32×32 32×32
Module Size 320×320 mm 320×320 mm 320×320 mm 320×320 mm
Refresh Rate u2265 3,840 Hz u2265 3,840 Hz u2265 3,840 Hz u2265 3,840 Hz
Brightness u2265 10,000 nits u2265 10,000 nits u2265 10,000 nits u2265 10,000 nits
Contrast Ratio 26,000:1 26,000:1 26,000:1 26,000:1
Ingress Protection IP65 IP65 IP65 IP65
Operating Temperature -40°C to +60°C -40°C to +60°C -40°C to +60°C -40°C to +60°C
LED Life-Span 100,000 hours 100,000 hours 100,000 hours 100,000 hours

Quick Quote

Get a response in 24 hours